Guide rail EF 135
Matching rail for absolutely correct guidance with the screed joint cutter EF135
Properties
- Make straight cut joints in screeds
- EF 135 no longer needs to be guided freehand
- Precise aluminum profile with anodized sliding surface and guide rib
- Pluggable rubber lip as a contact edge at the joint, anti-slip protection on the underside
- Also suitable for Mafell and Bosch
- Available in two different sets
Additional info
Item no. 176612 "Set guide rail 278 for EF135":
- 1x #174226 "Flex guide rail GRS160"
- 1x #176086 "Adapter plate guide rail EF135 | 278"
- 1x #176548 "Brush set EF135 | 5 pieces / VE"
Item no. 176613 "Set guide rail 288 for EF135":
- 1x #174226 "Flex guide rail GRS160"
- 1x #176248 "Adapter plate guide rail EF135 | 288"
- 1x #176548 "Brush set EF135 | 5 pieces / VE"
Important notice:
By changing the carrier plate by 10mm, there are two different versions in different lengths of the adapter plates for the guide rail.
Please check the correct length of your carrier plate before ordering.
The current version of the EF135 is 278mm.
If you have any questions, please contact your technical consultant!
Downloads
Technical data
Ordering information
Article | |
---|---|
Set guide rail 278 for EF135 | 176612 |
Set guide rail 288 for EF135 | 176613 |
Connector guide rail | 177764 |